LX-166: 8.0 Mil Double Coated PET (Polyester) With Pink Plastic

Equivalent To Tesa 4965. Designed to resist temperature fluctuations. For bonding to ABS, glass, rubber, EDPM and PVC. Peel adhesion: 90 oz./inch.

LX-166 is a double-coated clear adhesive tape featuring a transparent polyester with a transparent red polypropylene release liner. The premium acrylic adhesive system offers secure bonding at elevated temperatures along with excellent resistance to solvents, chemicals, and ultraviolet light. This product is recommended for bonding ABS plastics, glass, rubber, EDPM, PVC and metal. Also bonds well to low surface energy surfaces.

Note: Be sure surface areas are free from contamination before applying LX-166. Acrylic adhesives can take up to 48 hours to cure to maximum bond strength.

All technical statements and recommendations contained herein are for use as general guidelines only; it is the buyer's responsibility to thoroughly test each and every product to ensure it meets his particular requirements. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable in either tort or contract for any loss or damage direct, incidental, or consequential, arising out of the use or inability to use the product.


Specifications

Thickness: 8.0 mil
Adhesive: Acrylic
Release Liner: 3.0 mil
Peel Adhesion PSTC-1: PSTC-3 - 90 oz/in
Shear Strength: >24 Hours With 17.6 Oz. Loading On 1"x1" Sandwich Holding Of 2 S.S. Plates at 77 Degrees F
Heat Resistance: >24 Hours With 17.6 Oz. Loading On 1"x1" Sandwich Holding Of 2 S.S. Plates at 176 Degrees F
Service Temperature - Short Term: -4 to 356 ºF
Service Temperature - Long Term: -4 to 212 ºF
Tensile Strength MD: 22.8 kg/mm²
Tensile Strength TD: 23.2 kg/mm²
Elongation MD: 118 %
Elongation TD: 105 %


  • Model: LX-166


Your IP Address is: 34.204.194.190

Parse Time: 0.114 - Number of Queries: 143 - Query Time: 0.047778380004882