LX-133-A: 7.5 Mil "Gold Tape" Standard Trophy Tape

Double Coated White PVC (Vinyl). For permanent bonding to metal, high surface energy plastics, wood, glass, ceramic, paper and rubber. Commonly used for trophy nameplates and plaques. Suitable for internal or external applications, has superior weather and UV resistance. Peel adhesion: 84 oz./inch.

LX-133-A is a 7.5 mil double coated PVC film, which features a very high tack, moderate peel acrylic pressure sensitive adhesive system. The vinyl carrier allows conform ability and the high adhesive mass allows flow into uneven surfaces. Typical end uses are for permanent bonding to metal, plastic, wood, glass, ceramic, paper and rubber. The product is suitable for both internal and external applications and has superior weather and UV resistance.

Note: Be sure surface areas are free from contamination before applying LX-133-A.

All technical statements and recommendations contained herein are for use as a general guideline only; it is the buyer's responsibility to thoroughly test each and every product to ensure it meets his particular requirements. Seller's and manufacturer's only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable in either tort or contract for any loss or damage direct, incidental, or consequential, arising out of the use or inability to use this product.



Specifications

Adhesive: Acrylic
Total Thickness Without Liner: 7.5 mil
Peel Strength PSTC-3 Stainless Steel: 84 oz/in
Shear Strength PSTC-7 Stainless Steel: >24 Hours
Temperature Range: -20 to 200 ºF


  • Model: LX-133-A


Your IP Address is: 34.204.194.190

Parse Time: 0.104 - Number of Queries: 136 - Query Time: 0.039575935256958