LX-560: Tissue Supported Permanent Finger Lift Liner

This tape is the printing industry standard when a fingerlift double-coated with a tissue carrier tape is required. It has an aggressive adhesion for general bonding on a wide range of uses. Designed for heavier stock such as advertising and P.O.P. pieces, take-one pads, inventory pads, envelope flap closures, packing slip pockets, price tags and danglers.

Order As Width of Adhesive / Carrier
1/2"x216' 1/4" on 1/2"
1/2"x216' 3/8" on 1/2"
1/2"x1300' 1/4" on 1/2"
1/2"x1300' 3/8" on 1/2"
1/2"x2000' 1/4" on 1/2"
1/2"x2000' 3/8" on 1/2"
3/4"x216' 1/2" on 3/4"
3/4"x1300' 1/2" on 3/4"
3/4"x2000' 1/2" on 3/4"
1"x216' 3/4" on 1"
1"x1300' 3/4" on 1"
1"x2000' 3/4" on 1"



 Adhesive 35gsm Tissue 17gsm Adhesive & Canrier 85 micron Adhesive 35gsm Liner 65gsm Liner 55 micron


A permanent tape with a tissue carrier. The adhesive is an aggressive rubber based system and the liner a two side release system which overlaps at each edge to give a 'finger-lin' for easy liner removal.

APPLICATIONS The original and industry standard finger-lift tissue tape, DST/F has been used for continuous stationery, mailing envelopes and padded envelopes, studio/commercial artwork, photographic, Point of Sale and splicing. Especially useful for many products produced by print finishers.


TEST METHOD Adhesion to steel open side 1300 N/M 1300 N/M BS7116:1990 - D closed side 1300 N/M 1300 N/M BS7116:1990 - D Shear Adhesion open side 100 hours BS71 16:1990 - B closed side 100 hours BS7116:1990 - B Release ofliner from adhesive 25 N/M BS71 16:1990 - E

THERMAL PROPERTIES Recommended service temperature range O°C to 70°C Application temperature range l0°C to 50°C

SHELF LIFE Minimum shelf lite when stored in closed cartons away from direct sources of heat and sunlight 2 Years

HEALTH AND SAFETY INFORMATION Adhesive confonns to F&DA Regulation 175-105

  • Model: LX-560

Your IP Address is:

Parse Time: 0.103 - Number of Queries: 131 - Query Time: 0.038510641357421