LX-130: 3.5 Mil Double Coated PET (Polyester) Film

LX-130 is a polyester film coated on two sides with an aggressive permanent pressure sensitive rubber base adhesive and protected by a 61# bleached polycoated, silicone lay flat liner. This product is designed for bonding to urethane foam, closed cell sponge rubber, polyethylene foam, cork, felt and a wide range of bonding applications.

Note: Be sure all surface areas are free from contamination before applying LX-130.

All technical statements and recommendations contained herein are for use as a general guideline only; it is the buyer’s responsibility to thoroughly test each and every product to ensure it meets his particular requirements. Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither the seller nor the manufacturer shall be liable in either tort or contract for any loss or damage direct, incidental, or consequential, arising out of the use or inability to use this product.


Specifications

Adhesive: Rubber
Carrier: Polyester
Total Product Thickness (w/o Liner): 3.5 mil
Peel Adhesion From Stainless Steel - Exposed: 124 oz/in
Peel Adhesion From Stainless Steel - Liner Side: 136 oz/in
Probe Track - Exposed Side: 1600 g
Probe Track - Liner Side: 1800 g
Temperature Range: -20 to 170 ºF


  • Model: LX-130


Your IP Address is: 54.167.250.64

Parse Time: 0.131 - Number of Queries: 254 - Query Time: 0.058295564682007