LX-97: Silver Tape 5304 Clear

SilverTape® Industrial 5304,5305, 5310, 5315, 5320

Application: Are double sided high performance acrylic based adhesive tapes, which are especially designed for the bonding of high and medium energy surfaces as well as glass and various transparent plastics where a highly transparent bond is required and no stress corrosion may occur. The tapes are capable of absorbing the differing thermal expansions of the two different materials. These types maintain high impact resistance even at temperatures below 32 F° (0 °C).

These AFT tapes have a very high transparency and are very well suited for the bonding of high and medium energy surfaces as well as glass and various transparent plastics where a highly transparent bond is required and no stress corrosion may occur. Due to their conformability they are capable of bonding a variety of different thin and structured materials full surface and tension free. The tapes are capable of absorbing the differing thermal expansions of the two different materials. Important is to avoid stress and tension on the bond during application. This 53-series maintain high impact resistance even at temperatures below 32 F° (0 °C). More advantages: vibration dampening, very good sealing properties, very good resistance to weathering, aging, yellowing (UV influence), chemicals, plasticizers, resulting in excellent long term stability. Applications are attaching light box / neon advertisements and signs, strip lighting assemblies etc.

General Information: Have a closed cell structure which is wind and water resistant. Because they are 100% acrylic based, they will form an almost indestructible bond between the materials. This family is resistant to UV, ageing, softening agents and solvents (good plasticizer resistance). These tapes bond immediately and offer a perfect resistance to the peel and shear loads that can affect a bond. These types are very well suited to absorb dynamic loads as they are viscoelastic, they can act as a sealant, form a permanent tension free bond, and are suitable to bond many different types of synthetic materials. Our production facilities have more than 15 years of experience producing these acrylic foam tapes and are ISO 14001, ISO 9001 and ISO/TS 16949 certified.

Available Sizes:

Standard Length: yards (meter) 36 (33,0)

Maximum Length: yards (meter) 72 (66,0)

Core Diameter: inch (mm) 3 (75,0)

Width Tolerance: inch (mm) + 0.016 (0,4)

Tape Structure:

Adhesive: High Performance Acrylic

Adhesive carrier: Conformable Closed Cell Acrylic Foam

Description: Transparent

Coating: Clear (liner side) Clear (open side)

Liner: Red PE film (paper liner is optional)

Tape Characteristics:

Solvent Resistance: Excellent

UV Resistance: Excellent

Temperature Resistance

Long term: F° (°C) 212 (100)

Short term: F° (°C) 320 (160)

Shelf Life:
Please make sure that the tape is stored in its original packaging, in a dry place and at a temperature of preferably between 39 F° and 100 F° (4 °C and 38 °C). When the tape is stored under the right conditions it has a shelf life of 18 months.