LX-101: Economy Double Coated PET (Polyester) With Permanent Acr

General purpose acrylic adhesive bonds well to high surface energy plastics, metals and glass while giving good resistance to UV light, heat, humidity and most solvents. Polyester carrier tears by hand. Peel adhesion: 50 oz./inch

LX-101 is a polyester film double-coated with a general-purpose high tack acrylic- laminating adhesive. Product tears easily by hand for manual applications. It features a good balance of tack, shear and heat resistance. Bonds well to high surface energy plastics and metals. Ideally suited for high speed flying splices of paper, film and foils. Works well as a general purpose-bonding adhesive in a wide variety of industrial applications.

Note: Be sure all surface areas are free from contamination before applying LX-101.

These are approximate values and do not constitute a warranty. It is the customer's responsibility to determine these products fitness for use in the intended end use application. Test data contained herein is believed to be reliable and is not stated as, or to be taken as, a specification of these products.


Specifications

Adhesive Thickness Each Side: 1.50 mil
Carrier Thickness Polyester Film: .32 mil
Total Product Thickness: 3.32 mil
Liner: White Silicone Release Paper
Peel Adhesion To Stainless Steel: 50 oz/in
Elongation: 110 %
Service Temperature Range, No Load: -40 to 220 ºF