LX-463: Single Coated 8.0 Mil Reinforced Composite Banner Edge

Tape reinforces the banner edge and eliminates need for folding, sewing and adding grommets. No tear backing is coated with an aggressive acrylic adhesive that is highly resistant to water and will hold up in extreme cold, heat and humidity. Peel adhesion: 115 oz./inch

LX-463 is a single coated high strength white film that eliminates the need for banner grommets. The tape reinforces the banner edge and eliminates folding, sewing and adding grommets. The aggressive acrylic adhesive is highly resistant to water and will hold up in extreme cold, heat and humidity.

Note: Be sure all surface areas are free from contamination before applying LX-463.

These are approximate values and do not constitute a warranty. It is the customer's responsibility to determine these products fitness for use in the intended end use application. Test data contained herein is believed to be reliable and is not stated as, or to be taken as, a specification of these products.


Specifications

Carrier: 8.0 mil
Adhesive: 3.5 mil
Total Product Thickness: 11.5 mil
Peel Adhesion To Stainless Steel: 115 oz/in
Temperature Range: -40 to 200 ºF
Color: White